Deprecated: Assigning the return value of new by reference is deprecated in /home/myxmb/public_html/wp-includes/cache.php on line 36
Deprecated: Assigning the return value of new by reference is deprecated in /home/myxmb/public_html/wp-includes/query.php on line 21
Deprecated: Assigning the return value of new by reference is deprecated in /home/myxmb/public_html/wp-includes/theme.php on line 540
Warning: Cannot modify header information - headers already sent by (output started at /home/myxmb/public_html/wp-includes/cache.php:36) in /home/myxmb/public_html/wp-content/plugins/postratings/postratings.php on line 825 MyXMB.com - PSP Themes, XMB, M33 & PTF Themes » Simplicity Theme
i am confirming it works on 3.71 m33-3. runs great
nice theme, few bugs but definitly nothing major. get it lol. i like this one best out of all the other xmb’s
this theme is one of the custom xmb themes that’s why it has no ptf file. anyway, check out the site below for instructions on how to install. i’m not quite sure if the installation depends on the version of your psp so you better be careful about it. make sure to follow every steps and back up original files so that if any problems arise after installation, you can re-install it.
hey ive downloaded it but as every one says it dont work…
just wonderin if you need a custom firmware to use these types of themes i dunno!!!
if custom firmware is needed is there a way of adin the 1.50homebrew kernel thing without a pandora battery??
it would help a lot if a reply was possable
i know how it is installed.. its simple well not really!!! over the last few days ive been checkin up on this custom software. i havent done it my psp but its simple enough.
1. you have to buy a new sony psp battery and put a pandora pack on it (tutorials evry where on you tube)
2.after installing the pandora your psp will be reset to 1.50 enabling installations for custom firmware.
3.install a custom firmware 3.40 somit or other (tutorials available)
4. the psp will anable more stuff including these themes!!
as i said i havent done it so i cant go into detail but i said what i know so far
To the guys that had their psp’s bricked, can you tell me what custom firmware you have, i have 3.71 m33-4 and dont want my psp bricked as it will take a bit of time to unbrick it.
Also to the guys that dont know how to install XMB themes go to youtube and find out how to install custom firmware on your psp, then how to access flash0 or whichever to put these xmb themes in. Remember to make a backup of all files in the flash0 folder.
I used this guide and worked without a hitch. You can even use it if you only have one PSP (I had one PSP Fat at Official Firmware 4.00 before, now I have 3.71m33-3 with 1.50 Kernel #2).
Oh, I
d also like to know what firmware you guys who bricked were on, I don’t want this happening to me, you know.
Im using the brand new Dark Alex firmware 4.01, released today. The theme install semi-bricked it, so im going to restore the flash0 folder to fix. If someone comes up with a fix for the theme, I’d love to see it.
Ok… for all those who bricked their psp’s… u didnt “brick” it… its called a semi-brick… u can still fix it, all you have 2 do is access ur recovery menu (i.e. fully shut down the psp and hold R while turning it on). I have CFW 4.01 and wasnt paying attention to what firmware you were supposed to have(3.71) so i bricked mine as well; HOWEVER, there is a cure to put this theme on your psp, as long as it is 3.71 or higher. All you have to do is go to your module folder on the PSP(flash0:/VSH/Module… make sure you can see hidden folders and for ppl running Vista in the view folder options, make sure you can see system files; should be about 3-5 boxes below show hidden folders) and replace your ORIGINAL files into that folder… Hopefully you have backups, if not look up your firmwares files…
Once you have replaced the files, you should be able to boot your psp. Once you do that, you will see that the title bar is actually near the top of the psp screen… but at least your not semi-bricked anymore. The reason you got the brick is because you have a different firmware than the required one, and wen you replaced the module folder, you overwrote the file vshmain.prx and that is like the table of contents of wat you see when you turn on your psp.
For everyone who does not have CFW on your psp’s, I suggest you go on Youtube.com and make a pandora battery and Dark_Alex your psp, cause Sony doesnt want you to have full potential of what your psp can do.
luckyly, i’m not scared of bricking up my psp coz here in our country, it only takes you less than 5 $US to unbrick/ update it to the latest version….that’s why i’m into exploring and installing things in my recovery menu. :p
you need:
USB Cable
Windows Computer
A Custom Firmwared PSP with atleast 3.71 M33
How to:
1. Plug in your PSP by USB Cable
2. Hold the power switch up until power is fully off
3. hold the R button and turn the PSP back on
4. on your desktop,create a folder called ‘flash0′
5. on your computer, in a folder, go to Tools –> Folder Options… –> View
6. make sure ‘Show Hidden Files and Folders’ is checked and ‘Hide Protected Operating Systems’ isnt
7. on your PSP go to Advanced –> Toggle USB (flash0)
8. back on your PC, The folder that just came up, copy all of its contents into that flash0 folder you just made
9. now, in your PSP flash0 folder (not the one you made) go to vsh –> resource
10. in the theme folder, open up ‘resources’ copy and paste all the files in there into the vsh –> resource folder. re-writing all teh files that come up.
11. click back in both folders.
12. in the ‘vsh’ folder, open up ‘module’
13. in the theme folder, open up ‘module’ and copy and paste all the files and folders in there into the vsh –> module folder.
14. get out of the module folder, and out of the vsh folder.
15. now open up ‘font’
16. open up ‘font’ in your theme folder, and copy and paste all teh contents in there into your otehr font folder.
17. exit recovery menu on your PSP.
18. if done properly, you now have that theme, if not, and it just shows up with a lit up screen and the power button, you are semi-bricked
19. to fix, wait for your PSP to turn off, assuming you still haev your USB cable plugged in, hold R while turning back on.
20. go to Advanced –> Toggle USB (flash0)
21. on your computer, open up the flash0 folder you created at the start of this and copy all its contents back into the PSP’s flash0 drive re-writing any files it asks you to
22. your PSP is now back to normal how it was before you tried to put the theme on
hey, im running… firmware 4.05 is it possible for me to get this theme for my psp? if so- how is it done. im only familair with the PTF format stuff. do i need a custom firmware or somethin? homebrew? step by step on how to install corectly please, email me- tiger.shadows.1992@gmail.com thanks i appriciate it.
Leave a Reply
Welcome to Myxmb.com!
Pimp your PSP with new XMB themes and icons. Search through our growing gallery of hand picked quality XMB's. Scroll to bottom and press Previous for more XMB's.
Loading ...
December 26th, 2007 at 5:04 am
i cant post in my psp
December 29th, 2007 at 1:09 pm
what the heck. i cant play games with this theme.
January 5th, 2008 at 5:29 pm
this theme doesn’t even have a ptf file, how can i get it on my psp?
January 7th, 2008 at 1:17 am
there is no ptf file for this.
January 12th, 2008 at 7:29 pm
i am confirming it works on 3.71 m33-3. runs great
nice theme, few bugs but definitly nothing major. get it lol. i like this one best out of all the other xmb’s
January 16th, 2008 at 4:31 pm
How do i put dis in my PSP?? Do I extract all or sum other way?
January 17th, 2008 at 7:35 pm
how did u install this theme? what folder did it go to?
January 21st, 2008 at 10:41 pm
need more themes like this that work, a lot more. lol
January 22nd, 2008 at 8:38 am
is there a way to change the file to a ptf?
February 9th, 2008 at 4:02 pm
for the people who made this theme work, stop bragging and teasing, tell us how you made it work!!!
February 26th, 2008 at 8:17 am
great theme, the only thing that i dont like is that i can’t see my gameboot and it doesn’t have the TV icon on my slim, but everything works well.
February 28th, 2008 at 10:41 am
Actually, a brief explanation on how to install this particular theme would be helpful
February 29th, 2008 at 3:31 am
how do i put it on the psp? do you haveto have custome software?
March 15th, 2008 at 10:22 pm
i think this is like the best because its different then all the other themes should come up more like this thankx for the themes
March 19th, 2008 at 2:47 pm
this theme is one of the custom xmb themes that’s why it has no ptf file. anyway, check out the site below for instructions on how to install. i’m not quite sure if the installation depends on the version of your psp so you better be careful about it. make sure to follow every steps and back up original files so that if any problems arise after installation, you can re-install it.
www.psp-hacks.com/forums/about109776.html&p=1
March 21st, 2008 at 1:19 pm
how do u put it in the psp? I’ve extracted all the files but wht 2 do after that?
pls gimme an aswer
March 22nd, 2008 at 1:56 am
WTF Could Some1 Who Installed It In There PSP Tell Us How U Did It!?!
March 28th, 2008 at 1:26 am
hey ive downloaded it but as every one says it dont work…
just wonderin if you need a custom firmware to use these types of themes i dunno!!!
if custom firmware is needed is there a way of adin the 1.50homebrew kernel thing without a pandora battery??
it would help a lot if a reply was possable
thanks
March 28th, 2008 at 1:34 am
i know how it is installed.. its simple well not really!!! over the last few days ive been checkin up on this custom software. i havent done it my psp but its simple enough.
1. you have to buy a new sony psp battery and put a pandora pack on it (tutorials evry where on you tube)
2.after installing the pandora your psp will be reset to 1.50 enabling installations for custom firmware.
3.install a custom firmware 3.40 somit or other (tutorials available)
4. the psp will anable more stuff including these themes!!
as i said i havent done it so i cant go into detail but i said what i know so far
cheers
April 26th, 2008 at 1:59 am
this themes file is not a ptf file so its hard to install it on to your psp
May 14th, 2008 at 5:54 pm
Thanks buddy.
Great Theme.
May 16th, 2008 at 11:19 pm
don’t use this theme, it bricked my psp.
May 21st, 2008 at 2:13 am
i have the darth vader psp and my update is 3.9 how do i get the Simplicity Theme because it looks really cool and i want it on mine.
May 24th, 2008 at 8:17 pm
this is a great theme
May 26th, 2008 at 8:42 pm
yeah it just bricked mine too….wtf
May 29th, 2008 at 12:50 am
Can anyone convert this for m33 3.90 or cfw 3.93? Thanks
June 1st, 2008 at 7:38 pm
To the guys that had their psp’s bricked, can you tell me what custom firmware you have, i have 3.71 m33-4 and dont want my psp bricked as it will take a bit of time to unbrick it.
Also to the guys that dont know how to install XMB themes go to youtube and find out how to install custom firmware on your psp, then how to access flash0 or whichever to put these xmb themes in. Remember to make a backup of all files in the flash0 folder.
Thanks
June 24th, 2008 at 6:05 pm
does that work on the new slim and firmware 4.00
June 25th, 2008 at 5:23 pm
hey to you guys looking to install the custom firmware 3.71m33-x, there’s a great guide at
http://www.pspmod.com/forums/psp-hardware-guides/23428-guide-making-pandoras-battery-new-method.html
I used this guide and worked without a hitch. You can even use it if you only have one PSP (I had one PSP Fat at Official Firmware 4.00 before, now I have 3.71m33-3 with 1.50 Kernel #2).
Oh, I
d also like to know what firmware you guys who bricked were on, I don’t want this happening to me, you know.
Thanks
June 29th, 2008 at 12:49 am
Im using the brand new Dark Alex firmware 4.01, released today. The theme install semi-bricked it, so im going to restore the flash0 folder to fix. If someone comes up with a fix for the theme, I’d love to see it.
July 2nd, 2008 at 12:22 pm
i had already installed this theme into my psp.. but the question is.. am i able to update to CFW 3.80m33 with this XMB ?
July 2nd, 2008 at 1:51 pm
Ok… for all those who bricked their psp’s… u didnt “brick” it… its called a semi-brick… u can still fix it, all you have 2 do is access ur recovery menu (i.e. fully shut down the psp and hold R while turning it on). I have CFW 4.01 and wasnt paying attention to what firmware you were supposed to have(3.71) so i bricked mine as well; HOWEVER, there is a cure to put this theme on your psp, as long as it is 3.71 or higher. All you have to do is go to your module folder on the PSP(flash0:/VSH/Module… make sure you can see hidden folders and for ppl running Vista in the view folder options, make sure you can see system files; should be about 3-5 boxes below show hidden folders) and replace your ORIGINAL files into that folder… Hopefully you have backups, if not look up your firmwares files…
Once you have replaced the files, you should be able to boot your psp. Once you do that, you will see that the title bar is actually near the top of the psp screen… but at least your not semi-bricked anymore. The reason you got the brick is because you have a different firmware than the required one, and wen you replaced the module folder, you overwrote the file vshmain.prx and that is like the table of contents of wat you see when you turn on your psp.
For everyone who does not have CFW on your psp’s, I suggest you go on Youtube.com and make a pandora battery and Dark_Alex your psp, cause Sony doesnt want you to have full potential of what your psp can do.
July 22nd, 2008 at 9:05 pm
Wers the CTF file
July 23rd, 2008 at 8:32 am
luckyly, i’m not scared of bricking up my psp coz here in our country, it only takes you less than 5 $US to unbrick/ update it to the latest version….that’s why i’m into exploring and installing things in my recovery menu. :p
July 23rd, 2008 at 8:35 am
for those who don’t know on what cfw version that this theme will work, please read above…it says “3.7x m33″….morons
July 29th, 2008 at 4:04 pm
i followed jgedrick’s solution and i got mine working , gosh it’s beautiful
July 30th, 2008 at 3:58 am
great theme, i absolutely love it! it’s simple, and classic, and amazing
August 11th, 2008 at 8:33 am
this is tight for those who say it dont work u probaly dont no how to put on your psp YOU MUST HAVE ANY TYPE OF CUSTOM FIRMWARE
September 30th, 2008 at 1:33 am
this is really nice, thanks
and working fine on my Slim 4.01 M33-2 =D
thanks again =D
altho, i want my TV back!!! (is there any way of configuring this file to fix that?
September 30th, 2008 at 2:59 am
How to install:
you need:
USB Cable
Windows Computer
A Custom Firmwared PSP with atleast 3.71 M33
How to:
1. Plug in your PSP by USB Cable
2. Hold the power switch up until power is fully off
3. hold the R button and turn the PSP back on
4. on your desktop,create a folder called ‘flash0′
5. on your computer, in a folder, go to Tools –> Folder Options… –> View
6. make sure ‘Show Hidden Files and Folders’ is checked and ‘Hide Protected Operating Systems’ isnt
7. on your PSP go to Advanced –> Toggle USB (flash0)
8. back on your PC, The folder that just came up, copy all of its contents into that flash0 folder you just made
9. now, in your PSP flash0 folder (not the one you made) go to vsh –> resource
10. in the theme folder, open up ‘resources’ copy and paste all the files in there into the vsh –> resource folder. re-writing all teh files that come up.
11. click back in both folders.
12. in the ‘vsh’ folder, open up ‘module’
13. in the theme folder, open up ‘module’ and copy and paste all the files and folders in there into the vsh –> module folder.
14. get out of the module folder, and out of the vsh folder.
15. now open up ‘font’
16. open up ‘font’ in your theme folder, and copy and paste all teh contents in there into your otehr font folder.
17. exit recovery menu on your PSP.
18. if done properly, you now have that theme, if not, and it just shows up with a lit up screen and the power button, you are semi-bricked
19. to fix, wait for your PSP to turn off, assuming you still haev your USB cable plugged in, hold R while turning back on.
20. go to Advanced –> Toggle USB (flash0)
21. on your computer, open up the flash0 folder you created at the start of this and copy all its contents back into the PSP’s flash0 drive re-writing any files it asks you to
22. your PSP is now back to normal how it was before you tried to put the theme on
if you still want it, retry steps 9 - 17
cya
October 2nd, 2008 at 12:47 am
were is the ctf file
October 2nd, 2008 at 3:09 am
theres no ptf file for dat
October 4th, 2008 at 7:35 pm
how do you download suff like that please tell me
October 5th, 2008 at 3:36 am
Can this xmb theme put in one psp 4.01 m33-2?
October 7th, 2008 at 7:13 am
hey, im running… firmware 4.05 is it possible for me to get this theme for my psp? if so- how is it done. im only familair with the PTF format stuff. do i need a custom firmware or somethin? homebrew? step by step on how to install corectly please, email me- tiger.shadows.1992@gmail.com thanks i appriciate it.